Finishing Mowers

Finishing Mower

     Groom your lawn with one of our high capacity finishing mowers. Rear discharge is standard, which is a huge advantage for eliminating grass buildup in uncut areas, reducing blade wear and fuel costs. With rear discharge, either side may be used for trimming close to buildings or scrubs. Three high lift blades lift the grass and cut it cleanly discharging it neatly to the rear of the mower path. The wide discharge throat provides an almost unobstructed flow of cut material. Four caster gauge wheels adjust the cutting height and allow the deck to float with the ground contour. Solid rubber tires are not affected by punctures or tire pressure loss, ensuring a levelcut every time.

[Scroll for Specifications]

Model6 Ft.Unit
Max. Horsepower20 - 45 hp
Cutting Width72 inches (6 ft.)
Overall Width74 inches
Cutting Height3/4" min. to 4¼" max.
No. of Blades3
Blade Size2½ x 25-1/8" Hi Lift
Blade Tip Speed16,750 fpm
Blade SpindleGreasable - Ball Bearing
Belt DriveV-Belt (B-89)
Deck Thickness8 gauge
3 pt. HitchFree-Floating Cat. I
Gauge Wheels3" wide x 8" diameter - solid rubber - caster
Wheel SpindleGreasable Sealed Bearings
Gearbox1:2.83 ratio - Cast Iron Housing with Beveled Gears
PTO DrivelineQuick Coupler Series 4 metric (540 rpm)
Grass DischargeRear discharge with wide 44" throat
Shipping Weight571 lbs.

652000     6-ft.--- For 20 - 45 hp tractors.    Weight:   540 Lbs.
   Shipping $99.00 Ea. in US
For Multiple Items, Shipping Charges will be Adjusted on Invoice.

US Flag Waving

American Store

Copyright ©2009
PO Box 100, Litchfield, Illinois  62056